Basic Info.
Application
Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell
Material
Glass, Cotton Cloth
Specifications
Thickness Is Around 2.0~14mm
Chemistry
Organic Insulation
Classification
Organic Insulating Material
Certification
Q/Xb3138-2008
Transport Package
Wooden Cases
Product Description
Packaging & Delivery
Packaging Details: Standard Package: Wooden cases; We can also pack it according to the customers' requirements.
Delivery Detail:3-7 days
Specifications
thickness is around 2.0~14mm
Product Description
Excellent electric,mechanical and high temperature resistance properties. Used for insulating parts processing of 200 grade high temperature resistance electric machine,apparatus such as wind generator,dynamic vehicle,frequency Motor.
Technical Data Sheet
Table 1:Nominal thickness and tolerance
Nominal thickness | Tolerance | Nominal thickness | Tolerance |
2.0 | ±0.28 | 16.0 | ±1.12 |
2.5 | ±0.33 | 20.0 | ±1.30 |
3.0 | ±0.37 | 25.0 | ±1.50 |
4.0 | ±0.45 | 30.0 | ±1.70 |
5.0 | ±0.52 | 35.0 | ±1.95 |
6.0 | ±0.60 | 40.0 | ±2.10 |
8.0 | ±0.72 | 45.0 | ±2.30 |
10.0 | ±0.82 | 50.0 | ±2.45 |
12.0 | ±0.94 | ³50.0 | Negotiated by customer and supplier |
14.0 | ±1.02 | | |
Note:1.The other tolerances are negotiated by customer and supplier. 2. The tolerance of preferred thickness should adopt the bigger one if the one of preferred thickness for nominal thickness is not listed in the table. 3. Normal dimension: 960±15mm×1460±15mm,960±15mm×1960±15mm |
Flatness
Table 2: Max. tolerance from laminate surface to flat ruler
Thickness | Length of flat ruler |
1000 | 500 |
d£3.0 | Refer to "Note" | Refer to "Note" |
3<d£6 | 10 | 2.5 |
6<d£8 | 8 | 2.0 |
8<d | 6 | 1.5 |
Note: The permitted tolerance of laminate for nominal thickness d£3.0 is under consideration. |
Table 3:Properties requirements
No | Properties | Unit | Nominal thickness used for test mm | Requirements | Remarks |
1 | Flexural strength, perpendicular to layer | At room temperature | MPa | ³1.5 | ³400 | 200ºC±5ºC Tested after being baked for 1h at 200ºC±5ºC |
200±5ºC | ³300 |
2 | Impact strength, parallel to the layer | Simply supported beam method | kJ/m² | ³5 | ³70 | It is possible if one of the both is conform with this requirement |
Cantilever beam method | ³54 |
3 | Electric strength, perpendicular to the layer, at 90ºC oil | kV/mm | £3 | Refer to table 4 | |
4 | Breakdown voltage, perpendicular to layer, at 90ºC oil | kV | ³3 | ³40 | |
5 | Insulation resistance after immersing in water | W | All | ³1.0×108 | |
6 | Water absorption | mg | All | Refer to table 5 | |
Table 4: Electric strength, perpendicular to the layer
Mean thickness mm | Electric strength kV/mm | Mean thickness mm | Electric strength kV/mm | Mean thickness mm | Electric strength kV/mm |
0.8 | ³15.0 | 1.8 | ³11.6 | 2.6 | ³10.2 |
0.9 | ³14.6 | 2.0 | ³11.2 | 2.8 | ³10.1 |
1.0 | ³14.0 | 2.2 | ³10.8 | 3.0 | ³10.0 |
1.2 | ³13.2 | 2.4 | ³10.5 | | |
1.5 | ³12.0 | 2.5 | ³10.4 | | |
Note: 1. Electric strength perpendicular to layer direction at 90ºC±2ºC oil can optional choose one 20s raising voltage class by class and the requirement of voltage resistance test for 1 min. If the material is conform with one of the both methods, the electric strength shall be considered to be also conform with the standard. 2. If the arithmetic average of the sample thickness is between the both thicknesses listed in the above table, its requirement value shall use the interpolation method to get. 3. If the average is below 0.8mm,the requirement value of electric strength shall use ³15.0kV/mm, if the normal thickness is 3mm and the average of the sample thickness is over 3mm,the requirement value of electric strength shall use ³10.0kV/mm . |
Table 5: Water absorption
Mean thickness mm | Water absorption mg | Mean thickness mm | Water absorption mg | Mean thickness mm | Water absorption mg |
0.8 | £60 | 3.0 | £80 | 12.0 | £140 |
1.0 | £64 | 4.0 | £87 | 14.0 | £153 |
1.2 | £66 | 5.0 | £93 | 16.0 | £166 |
1.5 | £71 | 6.0 | £100 | 20.0 | £193 |
2.0 | £74 | 8.0 | £113 | 25.0 | £227 |
2.5 | £77 | 10.0 | £127 | Processed by one side to 22.5 | £250 |
Note: 1. If the arithmetic average of the sample thickness is between the both thicknesses listed in the above table, its requirement value shall use the interpolation method to get. If the average is below 0.8mm, the requirement value of water absorption shall use £60mg.If the normal thickness is 25mm and the average of the sample's thickness is over 25mm,the requirement value shall use £ 227mg . 2. If the thickness of the laminates is 25mm,it shall be processed to 22.5mm by one-side frame and the surface shall be smooth. |
Packaging & Shipping
Normally the out - packaging for the goods is wooden pallet or wooden case, we can deliver it by air or by ship.
Airport: Beijing, Tianjin, Qingdao, Nanjing, Shanghai, Guangzhou, Shenzhen
Sea Port: Tianjin,Qingdao, Shanghai, Ningbo, Guangzhou
Packing Type Photo is as the following:
Address:
Room 0282, Building 1, No. 99, Yulan Road, Yuhuatai District, Nanjing, Jiangsu, China
Business Type:
Trading Company
Business Range:
Chemicals, Electrical & Electronics, Industrial Equipment & Components, Packaging & Printing, Security & Protection
Company Introduction:
We are major in insulation material of various classes, from B to F, and from F to H, TOYO′S products are widely used in Motors, Generators, Welders, Electrical Heaters, and etc. And provide assurances for their long time, stability work.
The test results of from SGS Shanghai branch indicate that the TOYO′s products are in conformity with EU RoHS Directive 2002/95/EC and subsequent revision directives. And our product conforms to REACH regulation′s requirements (the newest version) of European Union after tested, and also passed UL certification of American and Canada.
" TOYO" Team was composed of many senior electrical engineers, and insist on response to every client′s enquiry 100%. Maintaining good cooperative relationship with main manufacturers in domestic for long term, and this provides " TOYO" With stable product quality; Reasonable prices; Timely supply.
We started to do the foreign trade since 2014, because of the good faith, now we have had so many customer from home and abroad. We are also planning to making the investment to enhance the relationship with our key suppliers, and meet our customer′s requirements.
Welcome you to contact us and discuss business at any time.